Getting started

From blank model to cutting-ready cabinet, in one dialog.

CutCraft is a parametric cabinet generator that runs inside SketchUp. Fill in a few dimensions and it builds the full carcass, doors, drawers, hardware, and a cutting-ready component structure — in seconds. This guide covers installation, cabinet creation, materials, machining settings, production export, and troubleshooting.

👋 New here? See the subscribe, download & cancel guide first if you haven't started your trial yet.
✨ Latest improvements — new cabinet types, in-place editing, cutting diagrams, and more accurate drawers. See what's new.
◆ Two plans. Sections marked Pro require the Pro plan and the separate Pro extension file. Everything else works on both plans. Compare plans.

01 System requirements

  • SketchUp 2014 or newer, Windows or macOS. CutCraft does not work with SketchUp Free/Web — the browser version doesn't support extensions of any kind, only the desktop app does.
  • No other plugins are required, though CutCraft's output works smoothly with OpenCutList if you want detailed nesting/cutting diagrams beyond CutCraft's own basic cutting tool.

02 Installing CutCraft

◆ There are two extension files. Design & Cutlist subscribers install cabinet_generator.rbz, Pro subscribers install cabinet_generator_pro.rbz. You get the right file on the download page right after checkout. Install only the one matching your plan — a Design & Cutlist key will not unlock the Pro file.
  1. Download the .rbz file from the CutCraft website.
  2. Open SketchUp.
  3. Go to Extensions → Extension Manager.
  4. Click Install Extension, then select the downloaded .rbz file.
  5. Restart SketchUp.

You'll see a new CutCraft toolbar appear, and a CutCraft entry under the Extensions menu.

Updating to a newer version

We recommend a clean reinstall when updating, so SketchUp doesn't hold onto old, cached code:

  1. Extensions → Extension Manager → find CutCraft → Uninstall.
  2. Close SketchUp completely — not just the file, the whole application.
  3. Reopen SketchUp.
  4. Install the new .rbz file.
  5. Close and reopen SketchUp one more time.

03 Your free trial

CutCraft is free for 30 days from checkout. Subscribe on cutcraft.io with your card to get your download link — you won't be charged today, the first payment is taken when the 30 days are over, and you can cancel anytime before that without paying anything.

Activating a license

  1. When CutCraft asks for your email, enter the same address you subscribed with.
  2. After your first payment, your license key arrives by email automatically. A new key is sent each billing period.
  3. Go to Extensions → CutCraft → Enter license key... and paste it in.

No key in your inbox after the first payment? Open Extensions → CutCraft → Show this computer's ID and send the code to hello@cutcraft.io.

⚠ Your license is tied to that specific computer. If you switch machines, you'll need a new key generated for the new machine's ID.

04 The toolbar

Once installed, a small CutCraft toolbar appears with quick-access icons. Everything is also reachable by right-clicking anywhere in your model, or from Extensions → CutCraft in the main menu.

IconWhat it does
CabinetGenerate a new cabinet
EditEdit a cabinet you've already selected
ExportExport a cutlist (CSV)
PanelGenerate a finishing/filler panel
DishwasherGenerate a dishwasher door + top panel
CountertopGenerate a countertop panel
CuttingGenerate a basic cutting diagram

05 Generating your first cabinet

  1. Click the Cabinet icon, or Extensions → CutCraft → Generate Cabinet.
  2. Choose a starting preset — sensible defaults for a common cabinet type. You can adjust everything afterward.
  3. Choose your measurement unit (mm, cm, or inches).
  4. A second dialog opens with individual settings: width, height, depth, material thickness, plinth height, shelves, drawers, doors, edge banding, and more.
  5. Click OK — CutCraft builds the cabinet directly in your model.

New cabinets are automatically placed flush next to the last cabinet of the same type, front edges aligned — so a whole run naturally lines up as you generate them one after another. If you've manually moved or rotated the previous cabinet, the next one follows that same position and angle.

Available presets

CustomBlank starting point
Base cabinetDoors, drawers, or sink base
Wall cabinetSingle/double doors, or 2 lift-up doors
Bar cabinetDouble-faced, decorative back
Bottle rackNarrow pull-out, 50mm steps
Oven housingDrop-down door
Column cabinetDoor + oven gap + upper shelves

06 Door & drawer options worth knowing

  • Opening direction — left, right, top (flip-up), or bottom (drop-down). A directional arrow is drawn on the door face so you can see which way it opens at a glance.
  • Drawer heights — equal by default, or type a ratio like 2,1,1 for a bottom drawer twice as tall as the two above it.
  • Edge banding — 2 mm, 1 mm, or none, on doors and drawer fronts.
  • Back panel types — standard overlay, rabbet, dado, or the "bar" style that wraps the whole cabinet like a second front.

07 Editing a cabinet

  1. Select the cabinet in your model — one click, it's a single component.
  2. Extensions → CutCraft → Edit selected cabinet, or the edit toolbar icon, or right-click → CutCraft → Edit.
  3. The same settings dialog opens, pre-filled with the cabinet's current values.
  4. Change what you need and confirm — the cabinet rebuilds in the same position and orientation.
ℹ This only works on cabinets generated by CutCraft. A cabinet drawn by hand doesn't carry the underlying "recipe" CutCraft needs to rebuild it.

08 Materials & edge banding

Select a cabinet or an individual part and open the CutCraft material tools. You can change the material of the selected part or apply one material to the whole cabinet.

  • Change selected part — use a different finish for one door, side panel, back, shelf, or decorative panel.
  • Change whole cabinet — replace the material across the complete cabinet in one operation.
  • Remembered materials — CutCraft remembers the last material used for each role, such as carcass, fronts, back, and decorative sides, and reuses that combination for the next cabinet.

Edge banding can be assigned to individual edges. When edge-band subtraction is enabled, the cutting size is reduced by the thickness of the selected band. Pro also includes a 1 mm ABS option.

ℹ Material changes keep the cabinet's parametric data, so the cabinet can still be edited afterward.

09 Other generators

  • Finishing panel — a flat end/filler panel matching your front material, any width and height, banded on your choice of edges.
  • Dishwasher housing — a decorative door (596 mm or 446 mm) and top strip, sized to tie into your countertop. No carcass — the appliance is the structure.
  • Countertop — a flat panel of any width and depth, banded on the front edge and both ends by default.

10 Exporting a cutlist

Extensions → CutCraft → Export cutlist (CSV)

  1. Choose which categories to include — carcass parts, hardware, fronts, back panels, drawer boxes.
  2. Choose where to save the file.

The CSV lists every part with its length, width, quantity, material, edge-banding, and notes such as rabbet or dado joinery. Identical parts across your whole project are automatically grouped and counted.


11 Cutting diagrams

Extensions → CutCraft → Cutting diagram

  1. Choose which part categories to include.
  2. Set your sheet size (default 2800 × 2070 mm), saw kerf, and whether parts may rotate 90°.
  3. Choose where to save — one SVG per material, showing exactly how parts lay out on each sheet, with edge banding marked in color.
ℹ This is a basic guillotine-cut layout — straightforward and real-world cuttable, but not a full nesting optimizer. For advanced nesting, export your cutlist and use a dedicated tool like OpenCutList.

12 Advanced cabinet settings Pro

Optional settings are grouped in dedicated menus so they do not interrupt the normal cabinet workflow. Open Extensions → CutCraft → Settings and choose the required group.

Settings groupUse it for
Advanced layoutExact divider positions, unequal door widths, and separate layouts for cabinets and wardrobes.
Fronts and oven columnExact front heights, oven installation height, and the number and heights of doors above and below the oven.
Drawers and mechanismsDrawer-bottom construction, slide model, nominal length, and system-specific values.
Niches, plinths and decorative sidesOpen niches, visible plinths, plinth returns, and full-height decorative side panels.
Project constructionIndependent carcass, back, drawer-box, and drawer-bottom thicknesses, plus overlay or dado-mounted backs.
Assembly systemChoose minifix, dowels, euro screws (confirmat), or a combined construction method for the required cabinet parts.

The values are remembered and used for the next cabinets until you change them again. Leave an exact-dimension field empty to use automatic equal distribution.

Insert and edit a plinth

Use the plinth command for the selected cabinet or apply one continuous plinth to all base cabinets. Its height, depth offset, thickness, material, and covered cabinet range remain editable afterward.


13 Drawer slide systems Pro

The Pro extension carries each manufacturer's own formulas for drawer box width, depth and mounting hole positions. Pick the system in the cabinet dialog and the carcass is calculated around it — no looking up catalogue tables by hand.

  • Hettich — Quadro, AvanTech You, InnoTech Atira
  • Blum — TANDEM, TANDEMBOX, LEGRABOX
  • Grass — Nova Pro Scala, Dynaneo, Vionaro V8 / V13
  • Häfele — MatrixBox Slim, Matrix UM A
  • DTC — MAGIC-PRO

Pro also adds sliding door systems from Sevroll, Hettich TopLine and Häfele, and six Blum Aventos lift-up systems for wall cabinets.

ℹ On the Design & Cutlist plan two slide types are available: ball-bearing slides and Hettich Quadro.

14 Hole positions & machining coordinates Pro

Open Extensions → CutCraft → Settings → All hole positions to adjust production coordinates.

Hole and routing positions can be configured by X, Y, and Z for assembly joints, hinges, drawer slides, shelf supports, sliding-door systems, and grooves. The default minifix position is 35 mm.

  • X — position along the part length.
  • Y — distance across the part width or from the reference edge.
  • Z — drilling or routing depth and working plane.

Euro screw (confirmat)

In the Pro construction settings, euro screws can be selected separately for carcass joints, vertical dividers, and blind or filler panels. The preset includes editable pilot, clearance, and head-bore diameters, drilling depths, end offsets, and maximum spacing.

The supplied values are production defaults, not a replacement for the screw manufacturer's installation sheet. Check them against the panel thickness, screw size, machine tooling, and whether the joint is drilled through the face or into the edge.

⚠ Always compare custom values with the hardware manufacturer's installation sheet and your CNC machine's coordinate system.

15 CNC export Pro

Production commands are grouped by output type. Depending on your workflow, use DXF for universal machining data or MPR for WoodWOP-compatible production.

  1. Open the production and export menu.
  2. Choose DXF or MPR.
  3. Select the required categories — assembly holes, hardware, shelf supports, Gola machining, or routing operations.
  4. Choose the destination folder and export the files.

Each part is exported with its outline, dimensions, identification, and selected machining operations. DXF separates bore and groove information into production categories, while MPR carries the machining coordinates required by WoodWOP workflows.

⚠ Make a test export and machine one sample part after changing a hardware preset, coordinate, tool, or post-processing workflow.

16 Optimik 4 export Pro

Use the Optimik 4 CSV command when the project will be optimized or cut with Optimik.

  1. Prepare the cabinets and verify materials, grain direction, and edge banding.
  2. Export the Optimik 4 CSV file from the production menu.
  3. In Optimik, import it with a matching .imp template.
  4. Make sure the material and edge-band codes in the file already exist in the Optimik stock database.

The export can include part name, quantity, dimensions, thickness, material, grain direction, edge-band sides, and whether the edge thickness changes the cutting dimensions.


17 Cost calculator Pro

Extensions → CutCraft → Cost calculator

Material and hardware costs are computed from the same model that produced the cutlist, so a quote reflects what was actually drawn rather than a separate estimate.

  • Separate price tables for carcass, fronts and profiles.
  • Editable material prices, saved between sessions — set your own rates once.
  • Per cabinet and per project totals.

18 Switching language

Extensions → CutCraft → Language — choose English, Bulgarian, Spanish, Portuguese (Brazil), or French. Your choice is remembered for future sessions. Menu labels update after restarting SketchUp; dialogs and messages update immediately.


19 Building your own component library

  1. Select the cabinet → right-click → Save Out → To Device... → save as its own .skp file in a folder of your choice.
  2. In SketchUp's Components panel, use Open or create a collection... and point it at that folder.
  3. Drag any saved cabinet straight into a new project — Edit selected cabinet still works on it, since the size "recipe" travels with the file.

20 Download & activation help

Updating an existing installation

Installing a newer .rbz file does not cancel your subscription or remove your license. Use the same CutCraft edition and the same email address used for checkout.

If the download page asks for another payment

  1. Do not create a second subscription.
  2. Check that you are using the same email address used for the original checkout.
  3. Send that email address, your plan, and a screenshot of the message to hello@cutcraft.io.

If CutCraft does not accept the license

  1. Confirm that the installed file matches your plan — Design & Cutlist or Pro.
  2. Open Extensions → CutCraft → Show this computer's ID.
  3. Send the computer ID, checkout email, SketchUp version, and the exact error message to support.

Troubleshooting

Nothing happens when I click Generate.
Make sure your trial hasn't expired, or that you've entered a valid license key.
A new cabinet appeared inside another cabinet, or in a strange spot.
This can happen if you were "inside" editing another group/component when you triggered generation. Click on empty space first, then try again.
"Edit selected cabinet" says no cabinet is selected, even though I clicked one.
Make sure you've selected the cabinet as a whole — one click from outside, not double-clicked into it — and that it was generated by CutCraft, not drawn by hand.
Tags don't seem to hide everything they should.
Reinstall the latest version — earlier versions had a tagging issue with shared/mirrored parts that's since been fixed.
CutCraft is made by Atelier Vior EOOD · VAT BG205735479 · Sofia, Bulgaria · hello@cutcraft.io · We reply within one working day.